Description
>> YOUR BEVERAGE. LOCKED IN. THERMALLY SHIELDED. <<
The outside world is hostile. Heat bleeds in. Cold bleeds out. Your drink is caught in the crossfire, and entropy always wins. Unless you cheat.
The Rabbit-Labs CryoShell™ is a double-wall, vacuum-insulated beverage cooler built to keep your cans locked at temperature while everything around them burns. Drop a cold one in, screw down the rubberized cap, and walk away. The vacuum layer between the inner and outer walls kills thermal transfer dead. Your drink stays cold (or hot) while the laws of thermodynamics rage uselessly against the hull.
Manufactured by Polar Camel and finished by Rabbit-Labs, the CryoShell™ is constructed from high-quality stainless steel built to take years of daily abuse. No flimsy plastic. No painted aluminum that chips on day two.
Each CryoShell™ is printed, in lab, with the Rabbit-Labs Circuit Rabbit design in full color. The result is a permanent mark fused into the metal itself. It won’t peel. It won’t fade. It won’t wash off. It’s part of the steel now.
Universal can compatibility. The CryoShell™ is engineered to accept both standard 12 oz and 16 oz classic-profile cans and the taller, slimmer modern cans that have taken over the beverage market. One cooler. Every can in your fridge. No adapters, no inserts, no compromises.
Crack. Drop. Seal. Stay cold.
▌README.TXT – INSTRUCTIONS FOR USE
Step 1: Load Unscrew the rubberized top cap by twisting counterclockwise. Place your beverage can (12 oz, 16 oz, or slim-profile) into the cooler.
Step 2: Seal Replace the rubber top and screw it down clockwise until snug. The seal locks in thermal insulation and keeps your can stable inside the shell.
Step 3: Enjoy That’s it. The vacuum insulation does the rest. Your beverage stays at temperature for extended periods with no intervention required.
Step 4: Swap When you’re ready for another, unscrew the top, remove the empty, drop in the next one. Repeat as needed.
▌DEBUG LOG – TROUBLESHOOTING
ISSUE: Beverage doesn’t seem to stay cold/hot as expected. FIX: Make sure the rubber top is fully screwed down. A loose seal allows ambient air exchange, which defeats the vacuum insulation. Also confirm the can is making contact with the inner wall and not suspended by a label or sleeve. Pre-chilling the CryoShell™ in a refrigerator for 15-20 minutes before first use can improve initial thermal performance.
ISSUE: Can doesn’t fit or rattles inside the cooler. FIX: The CryoShell™ is designed for standard 12 oz, 16 oz, and slim-profile beverage cans. Bottles, oversized cans (24 oz, tallboys), and non-standard containers may not fit. A small amount of movement is normal for slim cans in the regular-profile cooler.
ISSUE: Rubber top is difficult to screw on/off. FIX: Check the threading for debris or dried liquid. Rinse the cap and the top of the cooler under warm water to clear any residue. Do not over-tighten the cap, as this can compress the rubber seal and make removal difficult.
ISSUE: Exterior feels warm/cold to the touch when holding a beverage. FIX: This is actually a sign that the vacuum insulation is failing. A properly functioning double-wall vacuum cooler should feel neutral to the touch regardless of the beverage temperature inside. If the exterior consistently transfers heat or cold, the vacuum seal may be compromised. Contact Rabbit-Labs support for a replacement.
ISSUE: Engraving appears scratched or damaged. FIX: The Blue Steel laser engraving is fused into the steel surface and should be highly resistant to normal wear. Surface scratches on the surrounding steel are cosmetic and do not affect performance. Deep gouges across the engraving from abrasive contact or drops may cause visible marks, but the engraving itself is permanent and cannot be “rubbed off.”
▌SYS.WARN – WARNINGS, HAZARDS & DISCLAIMERS
Hand-Wash Only. This product is NOT dishwasher safe. Hand-wash only with mild soap and warm water. Do not use abrasive scrubbers, steel wool, or harsh chemical cleaners, as these may damage the finish and the Blue Steel engraving.
Not Microwave Safe. Do NOT place this product in a microwave. The stainless steel construction will cause arcing, sparking, and potential damage to your microwave and the cooler. This is a metal product. Metal and microwaves do not coexist.
Not for Hot Liquid Pouring. The CryoShell™ is designed to hold sealed beverage cans, not to serve as an open-top drinking vessel for hot liquids. Do not pour boiling water, coffee, or other hot liquids directly into the cooler. The metal interior will conduct extreme heat and may cause burns on contact.
Temperature Retention Warning. While the CryoShell™ provides superior insulation, it does not actively cool or heat your beverage. It maintains existing temperature, it does not create it. For best results, insert already-chilled or already-heated cans.
Intended Use. This product is designed for standard consumer beverage cans (12 oz, 16 oz, and slim-profile aluminum cans). It is not intended for use with glass bottles, loose liquids, or any non-beverage application. Rabbit-Labs LLC is not responsible for damage, injury, or unsatisfactory results from unintended use.
Choking Hazard. The rubber cap is a removable small part. Keep out of reach of small children.
Disclaimer. The CryoShell™ is manufactured by Polar Camel and finished/engraved by Rabbit-Labs LLC. This product is sold “as-is” for personal consumer use. While constructed from high-quality stainless steel and engineered for durability, long-term performance may vary based on usage, care, and environmental conditions. Rabbit-Labs LLC makes no warranty, express or implied, regarding fitness for a particular purpose beyond standard consumer beverage cooling. Maximum liability shall not exceed the purchase price of the product.
© Rabbit-Labs LLC. All rights reserved. The Rabbit-Labs name and logo are trademarks of Rabbit-Labs LLC. Polar Camel is a registered trademark of its respective owner.
