BACKORDERS HAVE BEEN ENABLED – If we are currently sold-out, you can backorder an H4M and it will reserve your spot in the next restock. Please note that for logistical purposes, backorders are limited and we reserve the right to cancel and refund any backorders if we feel anyone is trying to take advantage of the system.
Please note that we restock roughly once per month. If you order today, it may take up to 2-3 weeks until your order ships – however you will reserve your “place in line”.
The improvements of H4M:
- Single power on/off switch.
- When powered off, the battery will no longer phantom drain, i.e., the device can be completely powered off.
- Advanced battery management IC and battery display. It is easier to check the battery level.
- Matte screen. 3.2 Inch Upgraded Resolution LCD screen with improved touch response.
- 360-degree knob button.
- The GPIO port! The new generation H4M adds a GPIO port so users can utilize add-ons for the H4M. This is a feature that hasn’t been in any previous version of Portapack.
- Improved charge speeds. The H4M improves the charging quality and speed.
- Built in microphone and switch toggle. There is a toggle to switch between the built-in microphone and the headphone microphone.
- Now includes pre-installed speaker. When headphones are plugged in, the H4M will automatically switch from speaker mode to headset mode.
Special Notes:
It comes pre-assembled and has been tested in the USA by Rabbit-Labs and is ready to Flash.
It includes a RABBIT-LABS BRAND SD CARD. These are not the cheap Fake SD cards that have plagued many other PortaPacks found elsewhere!
Custom Rabbit-Labs Background will be included on the SD Card!
It comes UNFLASHED. You must flash a firmware of your choice onto the unit. We cannot advise you on which firmware to use.
How to vid by Talking Sasquach on the intial DFU flashing process: https://youtu.be/7CWy_o4V4eU?si=yT-4RRowmRFyjUUw
Each Rabbit-Labs HackRF Portapack H4M Basic Bundle comes included with:
- HackRF Revsion 10C
- HackRF PortaPack H4M
- Standard H4M LIPO Battery (Upgrade Available)
- Telescopic Antenna
- Rabbit-Labs 8GB SD Card w/ Preloaded Splash Screen
- a starter-pack of RL “SMOL” antennas (433Mhz, 915Mhz, 2.4Ghz)
The High Gain Antenna Upgraded Bundle comes with everything noted above PLUS:
- a high gain antenna bundle (433Mhz, 915Mhz, 2.4Ghz)
- Rabbit-Labs 32GB SD Card w/ Preloaded Splash Screen (this is in place of the 8GB Card that comes with the Basic Bundle)
**NEW** “The kitchen sink upgraded bundle” comes with everything included in the above bundles PLUS:
- Low Noise Amplifier
- Upgraded Rabbit-Labs LIPO H4M Battery Installation Service – We will install one of our upgraded H4M batteries in the device for you & test it before shipment!
- Upgraded Metal Screws Installation Service – We will install the upgraded metal screws in the device for you!
- PKCELL CR2032 Button Cell Battery – We will install the new PKCELL button cell battery in the device for you at no extra cost!
- 3D Printed Antenna Connector Caps (1 set) – color chosen at random
- SMA to BNC Adapter (1 adapter)
- Rabbit-Labs 64GB SD Card w/ Preloaded Splash Screen (this is in place of the 8GB or 32GB Card that comes with the other bundles)
Disclaimer:
It is your responsibility to use this device in a legal manner. It is meant for educational and research purposes only. Depending on your jurisdiction it may be illegal to transmit or use this device without a license. Prior to purchasing this device, please ensure it is legal for you to own or operate such a device. We are not responsible for your failure to research this prior to purchase and cannot provide a refund or support if your use is in violation of local laws. Also – We are not lawyers; we cannot provide you legal advice. If you are unsure if you can operate or own this device, please seek legal advice from a licensed attorney.
Please note – This product is not made by Great Scott Gadgets. The trademark “HackRF” is used with permission.
